The future of light control

DiGidot C4 Extended

The DiGidot C4 Extended combines all the DiGidot C4 Live features but includes many more powerful features such as recording, a scene generator, playlists, triggering functions, etc.
The DiGidot C4 Extended is the perfect solid state stand-alone controller.

Show Recording
User Interface

The built-in user interface not only allows you to configure and manage all devices in the network, record and edit scenes, but you can also easily play back scenes and playlists. There are several extra options such as adjustment and triggering of brightness, scene speed and even the colors of pre recorded scenes during live playback.

Record • Playback

The DiGidot C4 Extended pixel controller translates primarily Art-Net and DMX signals to SPI protocols. The DiGidot C4 Extended can record these signals on its microSD card. Once scenes are recorded to the DiGidot C4’s microSD card, the complete lighting installation can run on only the DiGidot C4 controllers. A 8GB microSD card provides roughly 10 hours of recording time. Once recorded, a scene can be looped as often as needed or you can blend the beginning and the end of a scene to a continus playback of the same content. For larger installations, several DiGidot C4s can be connected together and the recorded presets will be played in sync over all connected pixels.

Extensive trigger options

In addition to the record and playback features, the DiGidot C4 Extended offers many triggering options for a wide variety of actions. These features eliminate the need for a media server, Art-Net or DMX control system or pixel control software and create a truly stand alone and maintenance free control system.
Recorded scenes and playlists can be controlled in countless ways and guarantee a very user friendly experience.
The supplied 3.5mm TRRS jack connects to the 3 port analog input on the front side of the C4 and can be used to connect switches, relays, various sensors, dimmers, etc.

The extensive triggering options make the DiGidot C4 ideal for system integration such as building management systems.
Our ‘we can do it all’ philosophy ensures a very simple infrastructure with just one device and without the need for any additional hardware.

Once your scenes are recorded, it takes just a few seconds to setup the triggering and interaction.

  • Power up
  • 0-10V
  • Potentiometer
  • Dry contacts
  • Onboard switch
  • Built in calendar
  • Sunrise / sunset
  • UDP
  • Art-Net
  • DMX
digidot trigger interface
Home automation • Apps

The DiGidot C4 LED controller can also be integrated into local ethernet and WiFi networks.
An ethernet switch with DHCP server and the built in WiFi with access point and client mode allow for many network integration options.
Combined with the extensive triggering options and communication protocols make it very easy to control a DiGidot C4 controllers from third party home automation and building management systems like KNX, Crestron, AMX  and many more.
The free DiGidot C4 app connects directly to the DiGidot C4 and provides access to the complete user interface without the need for an additional computer.

Find out more about the app HERE.

ADAM Toren Interactive Lift
Dynamic Light Surface
Dynamic Tunel Lighting
Gin Sum Club
Stairway Lighting
Northern Lights
Amazing Output Capacity

The DiGidot C4 Live can output a maximum of 4096 individual LEDs or 1365 RGB LEDs. The channels are spread over 4 outputs and can be assigned in every possible way. The digital outputs of the DiGidot C4 Live can be configured in many different ways. It’s possible to output both  SPI and DMX signals for example. Being able to directly connect to LED lights, allows the creation of more cost effective lighting installations. Art-Net nodes and and DMX decoders are no longer required because the DiGidot C4 combines all of those features and many more in just one device. Huge amounts of DiGidot C4 controllers can be connected in a network which makes it very easy to scale the system according to project requirements.

RGB pixels

The DiGidot C4 supports more than 50 SPI protocols and around 60 protocols in total. We’re constantly updating and improving our compatibility by adding new protocols you our system. In case your protocol is not officially listed yet, please contact us. Our engineers are happy to help to get your protocol listed.

50+ supported ICs

Can’t you find your type of IC? Please send an e-mail to We will try to add the IC in the next firmware release.

Works well with all professional lighting control systems

The DiGidot C4 Controller works well with most common LED software used in professional event lighting. The device was thoroughly tested with MADRIX, but we can assure it works well with other software, such as: ArKaos, Chromateq, Pharos, MadMapper and Resolume. Nonetheless, the DiGidot C4 was used numerous times with grandMA consoles.

  • SIZE 153 x 74 x 28mm
  • WEIGHT 140gr
  • MOUNTING din-rail (clip not included), tie-wrap, surface mounted
  • OUTPUT CHANNELS up to 4096 Art-Net or 1024 DMX channels
  • INPUT SIGNAL Art-Net, DMX512, DiGidot C4 iOS/Google Play app
  • RECORDING TIME 10 hours (based on 4GB available memory)
  • INCLUDED ACCESSORIES 8GB microSD card, USB power cable, RJ45 cable
Choose your model

DiGidot C4 Extended 1

1 Universe Output • Show Recorder

385,00 (excl. VAT)Add to cart

DiGidot C4 Extended 2

2 Universes Output • Show Recorder

475,00 (excl. VAT)Add to cart

DiGidot C4 Extended 4

4 Universes Output • Show Recorder

655,00 (excl. VAT)Add to cart

DiGidot C4 Extended 8

8 Universes Output • Show Recorder

990,00 (excl. VAT)Add to cart

View Cart